Safety Instructions; Safe Operating Procedures; Operation - Stiga G 300 Instruction Manual

2.2.

SAFETY INSTRUCTIONS

OBLIGATION:
Read carefully before use and store for future reference.

2.2.1. SAFE OPERATING PROCEDURES

Training
a. Read the instructions carefully, learn the controls and the correct use of the machine.
b. Never allow children, persons with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, or persons unfamiliar with these instructions, to operate the machine. Local
regulations may limit the age of the operator.
c. The operator, or user, is to be held responsible for accidents or hazards involving third parties or third
party equipment.
Preparation
a. Make sure that the automatic system of perimeter delimitation is installed correctly as indicated.
b. Periodically check the area where the machine is used and remove stones, sticks, cables and any other
foreign objects that may interfere with its operation.
c. Periodically carry out a visual inspection of the blades, blade bolts and of the cutting unit to check that
they are not worn out or damaged. Replace worn out or damaged blades and bolts in pairs to maintain
the balance of the machine.
d. Warning signs must be placed around the working area of the machine if it is used in public areas or
areas open to the public. Signs must read as follows: "Warning! Automatic lawn mower! Keep away
from the machine! Children must be supervised!"

2.2.2. OPERATION

General information
a. Do not operate the machine with defective guards or safety devices that are not present, for example
without protections.
b. Do not put hands or feet near or under the rotating parts. Always keep away from the drain opening.
c. Do not touch any moving parts of the machine until they have come to a complete stop.
d. Always wear sturdy shoes and long trousers when operating the machine.
e. Never lift or transport the machine when the motor is running.
f. Remove the disabling device from the unit:
- Before removing an obstruction;
- Before checking, cleaning or working on the machine;
- If hit by a foreign object, to check for possible damage to the machine;
- If the machine starts to vibrate abnormally, check for damage before restarting it.
g. Do not leave the machine in operation unattended in the presence of pets, children or other people
nearby.
Maintenance and storage
a. Tighten all nuts, bolts and screws securely for safe operation of the machine.
b. Frequently check the robot lawn mower for wear or deterioration.
c. For safety reasons it is necessary to replace worn out or damaged parts.
d. Make sure that the blades are replaced only with suitable spare parts.
e. Make sure the batteries are recharged using the correct charger recommended by the manufacturer.
Incorrect use can cause electric shock, overheating or leakage of corrosive liquid from the battery.
f. In case of electrolyte leaks, wash with water / neutralizing agent and consult a doctor in case of contact
with eyes, etc.
g. Machine maintenance must be carried out in accordance with the manufacturer's instructions.
6
2. SAFETY
EN