Main Checks When Installing The Perimeter Cable - Stiga G 300 Instruction Manual

4.3.3. MAIN CHECKS WHEN INSTALLING THE PERIMETER CABLE:

1. Check that the maximum slope of the work area is less than or equal to 45% or 50% depending on
the model (see Par. 1.2 TECHNICAL DATA), and comply with the rules shown in Fig. below
a) if the slope is ≤ 20% the perimeter cable can be installed on it as shown in the image;
b) if the slope is > 20% and ≤ 45% (50%) the installation must include the slope area observing the
distance indicated in the image;
c) if the slope is > 20% and the slope area is not part of the part of the garden to be cut, the
distance indicated in the image must be observed;
d) if the slope is > 45% (50%) the slope area must be excluded observing the distance indicated in
the image.
a
E
c
EN
E
E
b
E
d
4. INSTALLATION
19