Closed Area; Settings; Spot Cut / Scheduled; Mowing Sessions - Stiga G 300 Instruction Manual

4.7.6.

CLOSED AREA

NOTE: Check the availability of this function on the STIGA.GO App.
The "Closed Area" section allows to start the robot lawn mower in an enclosed area normally excluded
from the work area because it is not reachable, but in any case delimited by the perimeter cable. (See
Par. 4.4.3).
1. Press the dedicated button to choose the "Closed Area" mode.
2. Place the robot lawn mower inside the closed area and follow the guided procedure.
NOTE: The user can select whether to have the robot lawn mower work for the full duration of the
battery life or for a shorter time set manually.
4.7.7.

SETTINGS

The "Settings " section provides access to the robot lawn mower's settings screen.
1. Press the "settings" button to enter Settings mode.
2. Select the function to be set-up.
4.7.8. SPOT CUT / SCHEDULED
The "Spot Cut / Scheduled" selector allows the user to activate or deactivate the programmed work schedule.
The number of weekly hours to schedule are suggested by the app according to the size of the garden.
1. If set to "Scheduled" the robot lawn mower works according to the scheduled work program.
2. If set to "Spot Cut" the robot lawn mower works in a single work cycle.
4.7.9.

MOWING SESSIONS

The "Mowing sessions" section allows you to program the time and working days of the robot lawn mower.
The number of weekly hours to schedule are suggested by the app according to the size of the garden.
1. Press on the "spot cut/scheduled" selector switch to enter the working hours set up menu and select
a day of the week.
2. Press the "add cutting time" button to add a new work schedule.
3. Enter the work start and end times then confirm.
4. The user has the option of applying the same working hours to several days of the week.
5. The working time will be displayed on its scheduled weekday. By pressing on each working time it is
possible to copy or delete it.
NOTE: The built-in clock of the robot lawn mower is automatically synchronised with the time on
the mobile device whenever the robot is connected to the App via Bluetooth
4.7.10. GO-TO CUT POINTS
NOTE: Check the availability of this function on the STIGA.GO App.
The "Go-To-Cut Points" section allows you to set one or more starting points for the robot lawn mower's
work in order to improve coverage in the different areas of the garden (see Par. 4.4). The number of
settable start points depends on the model of the robot lawn mower.
The work start points are defined using the following parameters:
• Distance from the starting point to the charging base measured along the perimeter wire.
• Direction to reach the work point (clockwise or anticlockwise).
EN
.
®
4. INSTALLATION
35