Panasonic CT-36SL13G Service Manual page 66

http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1404000000.html
14.4 Color temperature adjustment
(B/W Tracking)
Service DAC Adjust.
(CUT R) (CUT G) (CUT B) (R DR) (B DR)
TOP PREVIOUS NEXT
Minor Touch-Up Method
OBSERVE low and high brightness areas of a B/W picture for proper tracking. Adjust only as required
for "good gray scale and warm highlights".
1. LOW LIGHT areas - In service mode for making electronic adjustments, select CUT R, CUT G,
CUT B and adjust the picture for gray.
2. HIGH LIGHT areas - In service mode for making electronic adjustments, select drive R DR, B
DR and adjust the picture for warm whites.
Complete adjustment
PREPARATION
1. Turn the receiver "ON" and allow 30 minutes warm up at WHITE PATTERN.
2. Apply a color bar pattern (with no color).
3. Turn the SCREEN control (part of FBT T551) fully counterclockwise.
4. Preset the following service DACs for best results:
BRIGH______________________1 D0
CUT R______________________02 00
CUT G______________________02 00
CUT B______________________02 00
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1404000000.html (1 of 3)05.12.2008 0:02:52