Panasonic CT-36SL13G Service Manual page 11

http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0200000000x.html
IMPORTANT
To protect against possible damage to the solid state devices due to arching or static discharge, make
certain that all ground wires and CRT DAG wire are securely connected.
CAUTION
The power supply circuit is above earth ground and the chassis cannot be polarized. Use an isolation
transformer when servicing the receiver to avoid damage to the test equipment or to the chassis. Connect
the test equipment to the proper ground(hot) or (cold) when servicing, or incorrect voltages will be
measured.
2.1 X-Ray Protection Circuit Check& Adjustments
TOP PREVIOUS NEXT
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0200000000x.html (4 of 4)05.12.2008 0:00:25