Dissasembly For Service - Panasonic CT-36SL13G Service Manual

http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1000000000x.html

10 Dissasembly for service

TOP PREVIOUS NEXT
Back cover
Remove all the screws marked with an arrow (←) from the back of the receiver
NOTE
Screw location and quantity may vary depending on the model of the receiver serviced and the
application; various models are covered in this manual. Use same hardware when reassembling the
receiver.
4 screws at the top edge of the receiver.
4 screw by the A/V jacks.
1 screw by the antenna jacks.
1 screw at the lower part of TV.
1 screw at each lower corner of the receiver.
1 screw by the retainer plate of the AC power cord.
1 screw by the A.C. cord assembly.
NOTE
Extensions for board connectors may be needed to take voltages on some boards, please see parts list
section for part numbers in this service manual.
A-Board - Main chassis
The A-Board assembly rest on a chassis tray along with the D-Board.
Slide chassis tray out. Gently lift the tray and pull out. Disconnect plug connectors; release wire ties and
holders as required for complete chassis removal.
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1000000000x.html (1 of 4)05.12.2008 0:01:30