Panasonic CT-36SL13G Service Manual page 52

http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1300000000x.html
Entering service mode (open-back method)
While the receiver is connected and operating in normal mode, momentarily short test point FA1 (TP1
pin 2) to cold ground (TP1 pin 3).
The receiver enters the aging mode.
Yellow letters "CHK" appear in the upper left corner of the screen.
(The volume right/left and channel up/down will adjust rapidly).
Note:
If service mode is accessed by this method be sure to reset the set after service is performed.
13.1 Service adjustment default values for items
13.2 Instructional flow chart for service mode
13.3 Instructional flow chart for service mode (continued).
TOP PREVIOUS NEXT
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1300000000x.html (3 of 3)05.12.2008 0:02:15