http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1203000000.html
5. Adjust "HDAFW" until TPP33 or TPD40 is 1.6_KVpp ±50Vpp
Other method (DAF adjustment)
PREPARATION
1. Picture settings normalized.
PROCEDURE
1. Apply a crosshatch pattern.
2. Put a mark in the focus control (on fly-back), so the control can be put back in the original
position.
3. Turn the focus control (fly-back) fully, so the image is out focus.
4. Then in service mode adjust (HDAFS) DATA, so the focus is moving from side to side in the
picture.
5. Adjust (HDAFS) DATA so the picture looks in balance in left and right.
6. Turn focus (fly-back) control back to its original position.
NOTE
Repeat adjustment until best adjustment is obtained. For best adjustment, use oscilloscope as
described in previous adjustment method.
http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s1203000000.html (2 of 3)05.12.2008 0:02:09