Table of Contents
Advertisement
Installation
Installing Your KeepInTouch
PCMCIA Modem
This section describes how to install your KeepInTouch PCMCIA
modem. Please take a minute to review these procedures before
installing your modem.
Use Figure 2-1 and the following steps to install your modem.
1. Locate an unused PCMCIA socket on your PC. Refer to your
PC's user's guide for more information about the PCMCIA
socket.
2. Hold the modem so that the product logo label is facing up,
and the 68-pin connector is facing the PCMCIA socket.
Insert the modem into the socket, pushing it all the way in so
that all 68 pins are engaged.
!
CAUTION:
Use care when inserting the modem into the socket.
Do not force the modem, as that may damage the pins on
the connector.
2
Issue 2
May 1995
2-1
Advertisement
Table of Contents
