Paradyne KeepInTouch 3766 User Manual page 58

AT Command Set and S-Registers
Table 4-1. AT Command Reference (17 of 18)
AT
Command Description
%B n MAXIMUM DATA RATE AND MODULATION
This command sets the modulation, and the maximum data
rate, at which the modem may establish a connection.
The modem may use data rates lower than the values set
with this command if Autorating (S76) and Automoding
(S78) are enabled. If both Autorate and Automode options
are disabled, the modem is forced to operate only at the
data rate specified by this command.
For more information, refer to the B command, S-Registers
S76 and S78, and Appendix E, Advanced Modem Concepts.
%B n
%B300
%B1200
%B2400
%BL2400
%B4800
%BL4800
%B7200
%BL7200
%B9600
%BL9600
%B12000
%BL12000
%B14400
%BL14400
%B16800
%BL16800
%B19200
%BL19200
%B21600
%B24000
%B26400
%B28800
4-18
Issue 2
Max. Rate
300 bps
1200 bps
2400 bps
2400 bps
4800 bps
4800 bps
7200 bps
7200 bps
9600 bps
9600 bps
12,000 bps
12,000 bps
14,400 bps
14,400 bps
16,800 bps
16,800 bps
19,200 bps
19,200 bps
21,600 bps
24,000 bps
26,400 bps
28,800 bps
May 1995
Modulation
V.21 (if B0) or Bell 103J (if B1)
V.22 (if B0) or Bell 212A (if B1)
or V.23 (if B2 or B3)
V.34 or V.22bis
V.22bis
V.34 or V.32bis
V.32bis
V.34 or V.32bis
V.32bis
V.34 or V.32bis
V.32bis
V.34 or V.32bis
V.32bis
V.34 or V.32bis
V.32bis
V.34 or V.32terbo
V.32terbo
V.34 or V.32terbo
V.32terbo
V.34
V.34
V.34
V.34