Table of Contents
Advertisement
Installation
NOTE:
If you do not use the KIT Utilities to enable your modem,
the COM port and IRQ settings reserved for the modem
will be determined by the PCMCIA card enablers on your
PC. You need to know these values to set up your
communications and fax software applications. Refer to
your PC's documentation for information on where to find
the COM port and IRQ settings.
Using the KIT Utilities
With the KIT Utilities software you can set up your PC to use the
modem, perform diagnostic tests, and upgrade your modem with
new firmware. You can also view help text files on a variety of
topics, including how to use the KIT Utilities, modem tutorial
information, and AT command usage.
To use the Kit Utilities, first install the software on your PC. Once
installed, the KIT Utilities menus and messages guide you
through the available options and provide help along the way.
1. If you have a KIT Utilities diskette, insert it in your PC's
floppy drive.
2. Be sure to use the KIT Utilities software while in a DOS
environment. If you are using Microsoft
from that program (Alt-F4) before continuing.
3. To load the KIT Utilities program :
TYPE:
a :KIT
PRESS: Enter
The Main Menu for the KIT Utilities appears on your screen.
You may want to select the "Help" option and read "Installing KIT
Utilities" before selecting the "Install KIT Utilities" option.
2-4
Issue 2
where a is the letter designated for your PC's
floppy drive. Or, if you already have the KIT
Utilities loaded onto your PC's hard drive, enter
the drive and path to the KIT.EXE program. For
example: C:\KIT\KIT
May 1995
t
r
Windows
, exit
Advertisement
Table of Contents
