Paradyne KeepInTouch 3766 User Manual page 56

AT Command Set and S-Registers
Table 4-1. AT Command Reference (15 of 18)
AT
Command Description
&V n VIEW ACTIVE AND STORED USER PROFILES
This command displays a summary of the command and
S-Register information in the Active Profile (currently being
used) and in one of the two stored User Profiles. The
telephone numbers that you saved to memory with the
&Z command are also displayed. The User Profile must
have been already saved to memory using the &W
command.
&V0
&V1
&W n
WRITE (SAVE) CHANGES TO MEMORY
This command allows you to save the Active Profile
configuration options (command and S-Register settings) in
a User Profile. This command stores the information in the
nonvolatile RAM of the modem.
&W0
&W1
NOTE: This command is rejected if entered while using
Hayes Autosync mode (&M4).
&Y n LOAD USER PROFILE ON POWER-UP
This command allows you to select one of the two User
Profiles to be loaded into the Active Profile when the modem
is powered up. You must save a User Profile with the &W
command before using this command.
&Y0
&Y1
4-16
Issue 2
Displays summary of Active Profile,
User Profile 0, and Telephone Directory.
Displays summary of Active Profile,
User Profile 1, and Telephone Directory.
Saves Active Profile settings in User Profile 0.
Saves Active Profile settings in User Profile 1.
Selects User Profile 0 to be loaded on power up.
Selects User Profile 1 to be loaded on power up.
May 1995