Update Your Accessory Software - Humminbird DUAL HELIX STARTER KIT HWAL-TRANSOM Installation And Operation Manual

2. From the Home screen, tap Network + Updates.
3. Under Humminbird Units, tap Download Update. The download progress is displayed on the screen.
You can also tap the More Options icon (...) next to the device you want to update, and then tap Download Update.
NOTE: Your update may take several minutes to download. You may close the app while you wait for the download to complete.
4. Once your download is complete, tap Transfer Software.
You can also tap the More Options icon (...) again, and then tap Transfer Software or Delete Software.
5. Confirm the estimated transfer time.
6. Tap the radial button to select where to upload the software update (Internal Storage, SD Card 1 or SD Card 2).
NOTE: You cannot download software updates to an SD or microSD card with CoastMaster or LakeMaster charts saved to it.
7. Tap Start Transfer (Apple iOS) or Transfer (Google Android).
The upload progress is displayed under the selected unit in the One-Boat Network App and in the System Status view on the
control head.
8. Follow the on-screen prompts on the control head to complete the software installation.

Update Your Accessory Software

If you have additional equipment connected to the network, update each product's software individually. Refer to the accessory
operations manual for instructions.
Update Accessory Software with an SD Card
You will need an SD or microSD card (depending on your control head model).
1. Insert an SD or microSD card into the computer card slot. If the card contains any previous software versions, delete them.
2. Go to humminbird.johnsonoutdoors.com, and click Support > Software Updates.
3. Scroll down to Accessories and Mapping. Click on your accessory. The available software updates are listed as downloads at
the bottom of the page.
∆ Read the notices and instructions, and select Download. Your download will begin automatically.
∆ Open your computer's downloads folder, and confirm that the software file name matches your accessory.
∆ If the software file is a zipped folder, extract all files.
∆ Move the software file or extracted files from the downloads folder to the SD or microSD card.
4. Power on your control head. Start Normal mode.
5. Confirm that your accessory is detected by your control head.
6. Insert the SD or microSD card (with the software file) into the control head card slot.
7. APEX/SOLIX: Select the Files tool. From the Software Update tab, scroll to the accessory on the Accessories list. Confirm
that the most current software version is selected from the list, and select Install Now.
HELIX: The software will be automatically detected. It may take a few minutes for the software to be detected on the network,
and the control head will display a dialog box to indicate that the update is in progress.
8. When the software update is complete, remove the SD or microSD card from the control head card slot.
9. Restart: If you don't have any other software updates to install, power off the control head, and restart it.
Update Accessory Software with the One-Boat Network App
1. Open the One-Boat Network App on your mobile device.
2. Tap Network + Updates.
3. Tap Download Update next to the device you want to update. The download progress is displayed on the screen.
4. Tap Transfer Software next to the selected device once the download is complete.
7 Install an Ethernet Connection