Change From A Lost Gps Source (Helix Only) - Humminbird DUAL HELIX STARTER KIT HWAL-TRANSOM Installation And Operation Manual

Change from a Lost GPS Source
If the control head cannot detect the set GPS receiver, the control head will display an error message so that you can reset the
GPS source as follows:
∆ If the shared GPS receiver is not detected, the control head will switch automatically to the local GPS receiver (internal or
connected to the control head). Follow the on-screen instructions to save the local GPS receiver as the selected source.
NOTE: If the shared GPS source has been selected manually, your control head will not switch automatically to the local GPS receiver.
See Select a GPS Source to select a new source manually.
∆ If no GPS data is displayed, the source has been lost. See Select a GPS Source to select another GPS receiver in the network.
NOTE: APEX/SOLIX control heads will not prompt you to switch to another GPS source in the network. Use the Network Data Sources Menu
to select a new source (see Select a GPS Source).
GPS Source Lost (HELIX)
27
(HELIX Models Only)
GPS and Waypoints Overview