Change From A Lost Temperature Source (Helix Only) - Humminbird DUAL HELIX STARTER KIT HWAL-TRANSOM Installation And Operation Manual

Change from a Lost Temperature Source
If the control head cannot detect the selected transducer, follow the on-screen prompts to switch to another transducer in the
network. If you switch to a Local source, you are selecting the transducer or temperature accessory connected directly to the
control head.
NOTE: APEX/SOLIX control heads will not prompt you to switch to another transducer in the network. Use the Network Data Sources Menu
to select a new source (see Select a Temperature Source).
Temperature Source Overview
Temperature Source Lost (HELIX)
24
(HELIX Models Only)