Select A Sonar Source - Humminbird DUAL HELIX STARTER KIT HWAL-TRANSOM Installation And Operation Manual

Select a Sonar Source

When you first set up the network, the control head will automatically choose the transducer connected to it. APEX and SOLIX control
heads without a connected transducer will not select an alternate sonar source and will default to "None". Use the instructions in
this section to change the sonar source.
Overview
The transducer you select on the 2D Sonar tab (APEX/SOLIX) or the 2D tab (HELIX)
will provide the data for the 2D Sonar Views and related digital readouts.
The transducer you select on the Down Imaging tab (APEX/SOLIX) or the DI tab (HELIX)
will provide the data for the Down Imaging Views and related digital readouts.
Sonar Source Overview 18