Restore Defaults
If you choose to restore defaults on a Humminbird control head, it is important to note that the menu settings, including your saved
network settings, will be reset to their factory defaults. See your Humminbird control head operations manual for more information.
CAUTION! Use this menu with caution! Before you restore system defaults, export your control head menu settings to an SD card. It
is also recommended to export your navigation data to an SD card. See your control head operations manual for details.
APEX/SOLIX Series
1. Press the HOME key.
2. Select Settings > Restore Defaults.
3. Select the settings or application to restore.
4. Follow the on-screen prompts to confirm the reset.
NOTE: Restoring defaults on one APEX or SOLIX control
head on the network will cause all networked APEX or
SOLIX control head defaults to be restored.
HELIX Series
1. Main Menu: Press the MENU key twice.
2. Select the Setup tab > Restore Defaults.
3. Follow the on-screen prompts to confirm the reset.
29
Restore Defaults