Front Panel Buttons And Status Led Indicators - Omega DP6000 User Manual

DP6000 Process Meter

Front Panel Buttons and Status LED Indicators

Button Description
Symbol
Menu
Right arrow/F1
Up arrow/F2
Enter/F3
Note:
F4 is a digital input. Alarms 5-8
are enabled when relay
expansion module is installed.

Press the Menu button to enter or exit the Programming Mode at
any time.

Press the Right arrow button to move to the next digit during digit or
decimal point programming.

Press or hold the Up arrow button to scroll through the menus,
decimal point, or to increment the value of a digit.

Press the Enter button to access a menu or to accept a setting.

Press and hold the Menu button for three seconds to access the
advanced features of the meter.
LED Status
1-8 Alarm 1-8 indicator
1-8
Flashing: Relay in
manual control mode
M
T Flashing: Tare
Flashing: Relay
1-8
interlock switch open
Note:
LEDs for relays in manual mode
flash with the "M" LED every 10
seconds. "M" flashing by itself
indicates Aout – manual control
is used.
30
Instruction Manual