Setting Up The Meter (Setup) - Omega DP6000 User Manual

DP6000 Process Meter

Setting Up the Meter (setup)

The Setup menu is used to select:
1. Input signal the meter will accept
2. Dual-scale feature for some level applications
3. Select the display units/tags
4. Decimal point position
5. Programming Menu
6. Display parameter and intensity
7. Relay operation
8. 4-20 mA analog output scaling
Press the Enter button to access any menu or press Up arrow button to
scroll through choices. Press the Menu button to exit at any time.
Enter custom
units here
Note:
Use the d-SCAL selection
to activate the dual-scale
level feature - PV1 & PV2
(see introduction on page 6).
Set d-SCAL to no if both
displays are to be used for
anything other than PV1 & PV2.
36
Instruction Manual
Note:
Scal 1 & Scal 2 are
displayed instead of
Scale if d-SCAL is
selected under the
Setup Input menu.
They correspond to
the PV1 & PV2
scales.