User Management - Paradyne 6212 User Manual

3. Using the Web Interface
To forward logging information:
Procedure
Figure 3-27. Remote Log

User Management

To change your router's username and password:
Procedure
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.
3-32
1. Click on Tools and select Remote Log.
2. Select a Log Level from the drop-down list.
3. Type the IP address of the remote logging destination and click on Add.
4. Click on Apply. To make the change permanent, click on Tools (at the top of
the page) and select System Commands. At the System Commands page,
click on Save All.
1. From the Home screen, under the tools menu, click on User Management.
2. Change the login name and password.
3. If desired, you can change the idle timeout from this screen. The idle timeout
determines after how many minutes of inactivity the web interface is logged
off.
January 2005 6212-A2-GB22-00