Using the Web Interface
Logging Into Your Router
To configure your router, open your web browser. Ignore any error about lacking a
connection. Type the default IP address (192.168.1.1) into the Location field of
your browser and press the Enter key. The following screen appears.
Figure 3-1.
The default user name is Admin and the password is Admin. Both are
case-sensitive.
Note: Before configuring your router, make sure you have followed the instructions
in
configured for DHCP mode (if your router will be), and have proxies disabled on
your browser. If you see a login redirection screen when you access the web
interface, verify that JavaScript support is enabled in your browser. Also, if you do
not get the screen shown in
Internet files.
6212-A2-GB22-00
Login Screen
Chapter 2, Hardware Installation and PC
January 2005
Setup. You should have your PCs
Figure
3-1, you may need to delete your temporary
3
3-1