S-Vhs Vcr - Zenith Presentation H25D46DT Operating Manual & Warranty

Hook Up an S-VHS VCR to your TV
Your Zenith TV may be connected to a Super-VHS VCR through the S-Video
Input located on the connection panel on your TV. Also, you may "daisy
chain" up to five TVs to one Super VHS VCR through the special S-Video
LOOP OUT connection.
1
Hook up your S-VHS VCR to the Zenith TV
according to the diagram at the right.
2
Remove the back of the remote and put in two
AAA batteries.
Back of
Remote
3
Plug in your TV. The Zenith TV is
designed to operate on standard
current, 120-volt 60 Hertz AC.
Do not attempt to operate it on
DC Current.
4
If you wish to "daisy chain" more than one TV
to receive the S-VHS signal, you will need to
make the following connections with an S-Video
cable, inserting one end of the cable into the
LOOP OUT port with the other end inserted into
a S-Video In port of the second Zenith TV or
equivalent input for any other brand of TV.
206-3602
4
S-Video cable
not included
with TV
TV Back
ANTENNA
CABLE
S-VIDEO OUT
COMPUTER
IN
M.P.I.
R
L
Connect Audio Out
to an external
amplifier and
speakers.
VCR Back
VCR Back AV Panel
output
switch
3 4
S-Video Out
Audio Out
R L
S-VIDEO IN
R- AUDIO- L
R- AUDIO- L
VIDEO
AUX IN
AUDIO OUT
R- AUDIO- L
COMPUTER
AUDIO
P A G E 1 9