Step 2. Tv Reception Setup & Channel Search Auto Program: Select Antenna, Or Cable Service And Do A Channel Search - Zenith Presentation H25D46DT Operating Manual & Warranty

Auto Program (Channel Search)
Use Auto Program to specify Antenna or cable service
incoming signal source and automatically store all of the
channels found by the channel search
1
With the remote control in hand, press the POWER key to
turn on the Presentation TV.
2
Press MENU repeatedly until the Setup menu appears.
3
Using the Up/Down arrow on the remote control, highlight
Auto Program on the screen.
4
Press the Right or Left arrow to go to the Auto Program
menu.
5
Using the Up/Down arrow, choose either Cable TV or Off-
Air Antenna on the screen.
6
Press the Right or Left arrow to begin the Channel Search.
7
Press ENTER when the channel search is done.
Note: Auto Program finds channels being received by the TV
tuner.
Cable will not work unless you subscribe to a cable service.
Mini glossary
OFF-AIR-ANTENNA If only over-the-air channels are available, select Antenna.
CABLE If you subscribe to a cable service, select Cable.
206-3602
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
CAPTIONS
ALARM MENU
LANGUAGE
PRG
CABLE VCR
SURF FLASHBK
CHANNEL
VOLUME
CHANNEL
1 2
4 5
7 8
0
ENTER
3/5
MENU
2
3/5
RECORD PAUSE TIMER
PLAY
REWIND
STOP
TO PROGRAM
1
POWER
AUX TV
MUTE
VOLUME
3
6
9
7
QUIT
4/6
TV/VCR
SOURCE
FFWD
P A G E 2 1