Setup Menu (Start With Page 26, Auto Program); Add/Del/Bk - Zenith H27H49S Installation Manual

Channel Add-Delete-Blank
Fine-tune the channel selection list
Menu Operation/Front Control Panel
The menus can also be operated by using the TV front panel controls.
See page 24 for menu operation instructions. If you need to key-in numbers, then use the remote control
1
Press MENU repeatedly on the remote
until the Setup menu appears.
2
Use the Up/Down arrow to highlight
and select the Add/Del/Bk option.
3
Using either the NUMBER keypad and
ENTER or the Channel Up/Down arrows
on the remote, select a channel. (If
adding a deleted channel, you will
need to use the NUMBER keypad and
ENTER.)
4 Using the Right or Left arrow, choose
whether that channel is Added,
Deleted, or Blanked.
5
To continue, select another channel
and repeat Step 3. When you are fin-
ished, press ENTER to remove menu.
Adding Aux, VCR 3, and VCR 4, to
the Channel Preview List
Go to the Setup menu, select the
Add/Del/Bk option. Use Channel
Up/Down to select the option and
choose Added.
Notes
• If the option was turned Off in the
Service menu, you will have to rein-
state it before it will appear as an
option in the Channel Preview list.
• You can specify Add, Delete, or
Blank for VCR3, VCR4, and Aux.
Caution: If you delete CH3, VCR3 is
also deleted, if you delete CH4, VCR4
is also deleted and vise versa.
• If you delete a channel, it isn't gone
for good. Just select it using the NUM-
BER keypad on the remote, or add it
later.
SETUP MENU
AUTO PRG.

ADD/DEL/BK

CH 44 ADDED
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
ALARM MENU
LANGUAGE
PRG
VCR
CABLE AUX
AUDIO FLASHBK
CHANNEL
VOLUME VOLUME
CHANNEL
1 2
4 5
3
7 8
0
1
MENU
2
PAUSE
RECORD TIMER
PLAY
REWIND
STOP
.
POWER
TV
MUTE
3
3
6
9
3
ENTER
4
TV/VCR
SOURCE
FFWD
Page 31