Super Vhs Vcr/Digital Video Disk Player - Zenith C27C41 Installation / Operating Manual | Warranty

Connecting a S-VHS VCRor DVDplayer to
your Entertainment Machine
(VCR Only)
ALtach to
cable wall jack,
cable box, or
antenna
Super VHS VCR
Locate the Ant In jack on the back of
your S-VHSVCR.Connect the cable line
coming from your wall directly to this
jack,
Now locate the Out to TVjack. Connect
a cable from the Out to TVjack to the
ANTENNA/CABLE jack on the back of
your TV.
Find the audio and S-Video jacks on the
back of your S-VHS VCR, and connect
them following the instructions provid-
ed with your equipment,
DVD (Digital Video Disk) Player
Simply connect the S-Video/Audio out on the
DVD to the S-Video, Audio R-L Mono on the
TV.
Use Video/Audio sources for better
picture and sound.
To use with PIP." go to the Source Menu (page 24) and
choose the jack you've connected your S-VHS equipment to
as the Main or PIP source.
Both Video and S-Video jacks are available. You can con-
nect equipment to either of these input jacks but not at
the same time. Use the R - L Audio input jacks with either
the S-Video or Video input.
A/V cables
not included
with TV
Front input jacks
are also available for
S-Video, L - R Audio.
SUPERS-VHSVCR
DVDPLAYER
Provides higher quality picture and sound than an ordinary VCR when connected to the S-Video jacks.
Digital Video Disks can be connected to the S-Video jacks to provide the highest quality reproduction
available from this technology,
206-3591 P A G E 1 1