Booth Control - Graco ProMix 2KS Operation

Booth Control

Booth Control
Used by the operator for daily painting functions includ-
ing: changing recipes, signalling job complete, read-
ing/clearing alarms, and placing the system in Standby,
Mix, or Purge mode. It is typically mounted inside the
booth or near the painter.
Table 2: Booth Control Key and Indicator Functions
(see F
Key/Indicator Definition and Function
Display • Displays recipe number in Run
mode.
• If an alarm occurs, displays the
alarm code (E1 to E27) and red
Alarm indicator blinks.
• Recipe number displays after
alarm is reset.
Recipe • Green LED stays lit while a recipe
Indicator is in use.
• LED shuts off when Up
Down
alarm occurs.
• LED blinks while a new recipe is
loading and turns solid after load-
ing is complete.
• LED blinks when purging.
• Select a new recipe by pressing
Up
pressing Enter
Alarm Reset • Red LED blinks when an alarm
Key and occurs.
Indicator • Press key to reset alarm. LED
shuts off after alarm is reset.
Job Complete • Signals that job is complete, and
Key and resets A and B totalizers.
Indicator • Green LED blinks once after key is
pressed.
Enter Key Enters selected recipe and starts color
change sequence.
Up Key Scrolls recipe numbers up.
16
. 4)
IG
or
keys are pressed or if an
or Down keys, then
.
Table 2: Booth Control Key and Indicator Functions
(see F
Key/Indicator Definition and Function
Down Key Scrolls recipe numbers down.
Mix Mode Key • Starts Mix mode.
• Green LED remains lit while in Mix
mode or in Idle mode.
Standby Mode • Starts Standby mode.
Key • Green LED remains lit while in
Standby mode.
Purge Mode • Starts Purge mode.
Key • Green LED remains lit while in
Purge mode.
Alarm Indicator (red)
Recipe Indicator (green)
F . 4. Booth Control (see Table 2)
IG
. 4)
IG
Display
TI11614A
312776B