Totals Screen; Reset Total Screen; Reset Solvent Screen; Alarms Screens - Graco ProMix 2KS Operation

Run Mode Screens

Totals Screen

F . 11. Totals Screen
IG
This screen shows the job totals, grand totals, and job
number. Use the tabs to reset job totals (Job Complete),
reset solvent totals (Rst Solvent), or go to Level Control
Screen, page 23.
Solvent Totals and the Rst Solvent tab only appear if
"Meter" is selected under Solvent Monitor in Configure
Screen 5 on page 30.
NOTE: Grand totals are not resettable.

Reset Total Screen

F . 12. Reset Total Screen
IG
If job is reset, job number will increment by one for
default.
22

Reset Solvent Screen

F . 13. Reset Solvent Total Screen
IG
The screen will ask if you want to reset solvent total.
Select Yes or No.

Alarms Screens

F . 14. Alarms Screen
IG
Two screens show the last 10 alarms. Use the Up
Down keys to scroll between the two screens.
See Table 10 on page 73 for a list of alarm codes.
or
312776B