Table of Contents
Advertisement
•
Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(12) Serial-ATA2 Port connector: SATA1/SATA2/SATA3/SATA4
This connector supports the provided Serial ATA2 IDE hard disk cable connect to the
motherboard and serial ATA hard disk.
2-6-2 Headers
(1)
Line-Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-out, MIC connector with cable.
(2)
USB Port Headers (9-pin) : USB2, USB3
The header is used for connecting the additional USB port plug. By attaching an option
USB cable, you can be provided with two additional USB plugs affixed to the back
panel.
SATA4
SATA3
SATA2
SATA1
Serial-ATA2 Port Connector
AUDIO
2
Pin 1
Line-Out, MIC Headers
25
10
9
Advertisement
Table of Contents
