Preheating - Smeg SPO5L2S Manual

Table of Contents

Advertisement

This function allows you to:
enable/disable the door open sig-
nal; by default (tick next to "ON"
at the side of
appears by means of a pop-up
which indicates how long the door
has been open and is continuously
updated. If the tick is next to "OFF"
there will be no door open signal.
If the tick is on
signal is enabled which will be
emitted from a minimum of 10 to a
maximum of 210 seconds (mini-
mum and maximum values that can
be set) from when the door was
opened.
If the tick is on
ter how long the cooking cycle will
be cancelled if the door is opened.
NOTE: The door open warning pop-up
also appears when you set the audible sig-
nal or when the cooking cycle is cancelled.
Installation
), the warning
, an audible
, you can set af-

6.7 PREHEATING

From the home screen, press settings
options
> preheating
From here you can:
disable preheating by default.
NOTE: On both cases, it is still pos-
sible to enable/disable preheating
for a single cooking cycle.
Set the preheating temperature to be-
tween 0°C (the same temperature as
the one set for the oven) and 50°C;
enable/disable preheating pause,
i.e. the time after which it stops once
the preheat temperature has been
reached, it will be cancelled if the door
is not opened to place the dish in the
oven. This can be set from 3 to 20
minutes.
>
.
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spo5l2sdlSpo5l2sdSpo5l2sl

Table of Contents