Settings Menu; Setting The Language - Smeg SPO5L2S Manual

TO REPLACE THE SEAL:
Position the seal in the upper groove and
then press it carefully down until it adheres
to the front of the appliance. The joint of the
seal must be positioned at the top as shown
in the photo.
REPLACING THE INTERNAL LIGHT
BULB
This operation must be carried out by a
qualified technician.
The led strip is located in the door.
Live parts
Danger of electrocution
• Unplug the appliance.
The oven cavity is fitted with a 9
W LED strip.
To prevent safety hazards for
users, all technical inspections or
repairs must be carried out by
qualified personnel.
SAFETY THERMOSTAT
The appliance is equipped with a safety
device that triggers in case of serious mal-
function.
In the event of a fault, contact the
Technical Assistance service.
Only for the installer/technical support:
1. Unscrew the protective cover for the
thermostat.
2. To reset the safety thermostat, press the
button on the back.
Cleaning and maintenance Use

6 SETTINGS MENU

6.1 SETTING THE LANGUAGE

Selecting the
and customize the oven parameters.
The icon allows you to select the
language, which is done by sliding the
language icon to the right or left.
icon allows you to set
51