Table of Contents
Advertisement
Power Flow Screen
Driving History
The Driving History screen shows the miles
(km) driven in both Full Electric and Hybrid
(battery and engine powered) modes for both
the previous week and the current week. The
data is displayed in a bar graph: Electric mode
in teal and Hybrid mode in blue.
Driving History Screen
Charging Schedule
To set a charging schedule, select the Hybrid
Electric App on the touchscreen and follow
these steps:
1.
Select "Schedules".
Charging Schedules Screen
2.
Select one of the three charging schedules
by pressing the appropriate arrow on the
right side of the screen.
3.
Select if Scheduled Charging should "Charge
Until Full".
4.
Set the Charge Start Time: Hours, Minutes,
and AM/PM.
NOTE:
This is to occur every week (as long as the
vehicle is connected to an EVSE).
Set Charge Schedule
5.
When done, press the back arrow. The active
schedule will be indicated by the check mark
to the right of the schedule event line. The
Event Action and Time will be displayed.
6.
To add another Scheduled Charging event,
repeat these steps.
NOTE:
A maximum of two independent Scheduled
Charging events can be scheduled at a given
time.
Charge Until Full
If "Charge Until Full" is selected, the vehicle must
be plugged in within five minutes of the start
time.
There is also a Climate Schedule which can
be set and managed for climate or cabin
conditioning.
EXTERIOR
55
Advertisement
Table of Contents
