Table of Contents
Advertisement
3.
If the Portable Charging Cordset (EVSE)
is ready to charge, ensure the vehicle is
in PARK, and then connect the charge
connector to the vehicle's charge inlet.
You will hear a "click" when the charge
connector is inserted correctly and coupled
with the vehicle's charge inlet.
Inserting The Charge Connector
Into The Vehicle Charge Inlet
4.
When the vehicle commences charging, the
green indicator light will turn on.
NOTE:
The vehicle should start charging
automatically.
5.
To stop the charging process, disconnect the
Portable Charging Cordset (EVSE) from the
vehicle first, and then from the wall outlet.
EXTERIOR
52
To disengage the vehicle coupler, push the
button on the connector.
Removing The Charge Connector
From The Vehicle Charge Inlet
6.
Close the inlet door when a Portable
Charging Cordset (EVSE) is not connected
to the vehicle.
Troubleshooting Using The
Status Indicator Display
If the vehicle is not charging properly, consult
the status indicator lights.
The Yellow LED signals a failure with the outlet.
The Red LED signals a failure in the charging
system.
The Green LED signals correct operation of the
system.
LED Indicator Lights
1 — Yellow LED
2 — Red LED
3 — Green LED
Any faults in charging are displayed by the
LEDs, either steady or flashing, located on the
status indicator display of the Portable Charging
Cordset (EVSE).
NOTE:
During normal operation, the charge connector
or AC plug may feel warm. If either one feels hot
during charging, unplug the Portable Charging
Cordset (EVSE) and have a qualified electrician
inspect the wall outlet before you continue
charging.
Advertisement
Table of Contents
