Pair/Delete A Device - Jeep WRANGLER 2024 Owner's Handbook Manual

Hide thumbs Also See for WRANGLER 2024:
Table of Contents

Advertisement

Uconnect 5/5 NAV With 12.3-
inch Display Uconnect Settings
Press the Vehicle button, then press the Settings
button toward the top of your touchscreen to
get started with customizing your settings.
NOTE:
Depending on the vehicle's options, feature
settings may vary.
My Profile — Customize features such as
"Voice Options", "Notification Pop-ups", and
much more!
Display — Customize features such as your
display brightness, or even allow navigation
instructions to appear on your instrument
cluster display!
Safety/Driving Assistance — Would you like to
be able to customize your Forward Collision
Warning features? Within the Safety/Driving
Assistance setting, you can customize both
the warning and sensitivity for your Forward
Collision Warning detection.
Phone/Bluetooth® — Do you have your phone
paired to your Uconnect system yet? Press the
Phone/Bluetooth® button to begin the phone
pairing process.
Camera — Pressing the Camera button on
the touchscreen will display settings related
to the vehicle's cameras. A couple of these
settings are "ParkView Backup Camera Delay"
and "Forward Facing Camera Guidelines".
Seats & Comfort — The Uconnect system
allows you to adjust your comfort levels for
your heated seats, heated steering wheel, and
even ventilated seats!
Key Off Options — The Uconnect system
gives you the option to customize what your
vehicle does when it shuts down. One option
is adjusting how long your headlights stay on
after you turn your vehicle off.
Audio — Did you know you can customize
your vehicle's audio? Press the Audio button
to begin tuning your vehicle's audio to your
liking.
P
/D
A D
AIR
ELETE
EVICE
Did you know pairing your
smartphone with your vehicle is
quick and easy? Pairing your
smartphone with your vehicle will
open even more possibilities for
your driving convenience, such as
playing music from your phone
or answering calls through your
Uconnect system.
1.
Make sure Bluetooth® is enabled on your
mobile phone.
2.
With the vehicle in the ACC or ON/RUN
position, press the Phone button on the
vehicle's touchscreen menu bar.
3.
Press "Device Manager".
4.
Select "Add Device".
5.
Follow the prompts on your phone and on
the touchscreen.
Scan me
INTERIOR
13

Advertisement

Table of Contents
loading

Table of Contents