Pat" - Step Record Pattern Changes - Yamaha QY-300 Owner's Manual

"Pat" — Step Record Pattern Changes
6
Enter the Required Pattern or Chord Data
Refer to the following sections for details on how to use the pattern and chord
step-record displays.
7
Stop Recording
Press the [ ] key to exit from the step record mode and return to the normal
m
SONG play mode.
Here's how the STEP record pattern display will look if you've selected an
empty song (the appropriate pattern data will appear if the selected song con-
tains data).
Style number
Time signature
Measure number
Moving Around & Entering Data
As usual, the cursor keys are used to move the cursor to the location at which
you want to enter data, and the [–1/NO] and [+1/YES] keys, data dial, or
numeric keypad are used to actually enter or change data.
The cursor keys also move you forward or backward through the song:
moving the cursor past the bottom of the screen accesses subsequent measures,
while moving it above the top of the screen accesses the preceding measures
(if there are any). In th pattern display moving sideways takes you to the time
signature, pattern number, and section parameters.
In all of the STEP record displays the [
first measure.
Patterns — Part 2: Recording Accompaniments
Section
] key takes you directly to the
ß
End-of-song marker
6 9