The Song Jobs - Yamaha QY-300 Owner's Manual

The Song Jobs

The Song Jobs
The song mode includes 24 song "jobs" that perform a variety of important functions. To access
and use the song jobs, press the [JOB] key while in the SONG play mode. This calls the song
job list. You can select any job on the list simply by moving the cursor to the required job (use
the cursor keys or the data dial) and pressing [ENTER]. You can also move up or down the list
in 1-page steps by using the cursor [ ] and [ ] keys while holding one of the [SHIFT] keys.
An alternative method is to enter the job's number via the numeric keypad and press [ENTER].
00: Undo/Redo
The last operation
performed is "forgotten"
by the UNDO
whenever the SONG or PHRASE
step record mode is engaged,
even if the step record mode is
exited without actually recording
any data.
3 4
Returning to the SONG Mode
The [F6] function key ("Exit") can be used to exit from any song job, and then
from the job list thereby returning you to the normal song play mode. You can
also press the [F6] function key ("Exit") while holding one of the [SHIFT]
keys to directly return to the SONG mode.
This job will "undo" any other song job, edit, or record function if it is
executed before any other operation is performed. In all cases the affected data
is restored to the state it was in before performing the job, edit, or record
operation. This job will also undo the last undo operation (redo).
The name of the last operation performed will appear on the display (i.e. the
operation which will be "undone"). In the example display, above, a quantize
opersation will be undone.
job
Press [ENTER] to execute the Undo/Redo job. The metronome icon will
appear on the display while the data is being processed, then "Completed" will
appear briefly when the job is done. Press the [F6] key ("Exit") to return to the
job list, or a mode key to go directly to the selected mode.