Yamaha QY-300 Owner's Manual page 99

NOTE I f a s e r i e s o f a s t e r i s k s a p -
pears in the style name area, the
selected style contains no data
and a pattern name cannot be
assigned.
Lower-case To enter a lower-case character, use the cursor keys to move the
Characters cursor to the position at which a character is to be entered, then
press the micro-keyboard key corresponding to the character to
be entered.
Upper-case Hold the left [OCT DOWN] key ("CAPS") while pressing the
Characters micro-keyboard key corresponding to the character to be entered.
Symbols Hold the left [OCT UP] key ("SHIFT") while entering to enter
the symbols listed above the characters corresponding to each
micro-keyboard key.
Space The right [OCT DOWN] key enters a space.
Numbers Numbers can be entered via the numeric keypad.
Delete The right [OCT UP] key deletes the character at the cursor
position.
When the name has been entered press the [F6] key ("Exit") to return to the
job list, or a mode key to go directly to the selected mode (it is not necessary to
press the [ENTER] key to enter the specified name).
The Pattern Jobs
9 1