Yamaha QY-300 Owner's Manual page 110

The Phrase Jobs
12: Put Phrase
The time signature of
the phrase will not
affect the time signature
of the song.
13: Clear Phrase
102
Copies the data from a specified user phrase to the specified ramnge of meas-
ures in the specified track of a specified song.
The "Phrase" parameter specified the source phrase — i.e. the user phrase
from which the data is to be copied: "001" ... "100".
The "Song" parameter selects the destination song — i.e. the song to
which the phrase data is to be copied: "01" ... "10".
The "TR" parameter selects the destination track — i.e. the track to which
the phrase data is to be copied: "01" ... "16".
The "M" parameters specifies the measure of the destination track to
which the phrase data is to be copied.
After setting the parameters as required press [ENTER] to execute the Put
Phrase job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.
Completely clears all data from the specified user phrase.
The "Phrase" parameter selects the user phrase to be cleared: "001" ... "100".
After setting the parameter as required press [ENTER] to execute the Clear
Phrase job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.