Before Turning On The Mixer; Turning The Power On - Yamaha MG124FX Owner's Manual

Before Turning on the Mixer

1
Be sure that the mixer's power switch is in the
STANDBY position.
Use only the PA-20 adaptor included with this
mixer. Use of a different adaptor may result in
equipment damage, overheating, or fire.
2
Connect the power adaptor to the AC ADAPTOR IN
connector ( 1 ) on the rear of the mixer, and then turn
the fastening ring clockwise ( 2 ) to secure the connec-
tion.
2
3
Plug the power adaptor into a standard household
power outlet.
Be sure to unplug the adaptor from the outlet
•
when not using the mixer, or when there are light-
ning storms in the area.
To avoid generating unwanted noise, make sure
•
there is 50 cm or more between the power adaptor
and the mixer.

Turning the Power On

Press the mixer's power switch to the ON position. When
you are ready to turn the power off, press the power switch to
the STANDBY position.
1
Note that trace current continues to flow while the
switch is in the STANDBY position. If you do not
plan to use the mixer again for a long while, please
be sure to unplug the adaptor from the wall outlet.
Introduction
5
MG12/4FX