Introduction; Before Turning On The Mixer; Turning The Power On/Off; Computer System Requirements - Yamaha MW12 Owner's Manual

Introduction

Before Turning on the Mixer

1
Be sure that the mixer's power switch is in the
STANDBY position.
Use only the included power adaptor (PA-20) or
an equivalent recommended by Yamaha. Use of a
different adaptor may result in equipment dam-
CAUTION
age, overheating, or fire.
2
Connect the power adaptor to the AC ADAPTOR IN
q
connector ( ) on the rear of the mixer, and then
turn the fastening ring clockwise (
connection.
3
Plug the power adaptor into a standard household
power outlet.
• Be sure to unplug the adaptor from the outlet
when not using the mixer, or when there are
lightning storms in the area.
CAUTION
• To avoid generating unwanted noise, make
sure there is 50 cm or more between the power
adaptor and the mixer.

Turning the Power On/OFF

Press the mixer's power switch to the ON position.
When you are ready to turn the power off, press the
power switch to the STANDBY position.
Note that trace current continues to flow while the
switch is in the STANDBY position. If you do not plan
to use the mixer again for a long while, please be sure
CAUTION
to unplug the adaptor from the wall outlet.
To prevent loud pops and noises, turn on the power to
NOTE
your sound gear starting with the sources (instruments,
CD players, etc.) and ending with the power amplifier or
powered speakers.
Example : Instruments, microphones, and CD players
first, then the mixer, and finally the power
amplifier or powered speakers.
When turning off the power to the system, reverse the
order described above.
6
MW12CX/MW12C Owner's Manual

Computer System Requirements

Windows Vista
Computer
OS
CPU
Memory
w
) to secure the
Windows XP
Computer
OS
CPU
Memory
w
q
Macintosh
Computer
OS
CPU
Memory
Cubase AI 4 System Require-
ments
Windows
OS
CPU
Memory
Audio
Interface
Hard Disk
Macintosh
OS
CPU
Memory
Hard Disk
NOTE
Windows-based computer with built-in USB inter-
face
Windows Vista
1 GHz or higher Intel Core/Pentium/Celeron proces-
sor
1 GB or more
Windows-based computer with built-in USB inter-
face
Windows XP Professional/XP Home Edition
750 MHz or higher Intel Core/Pentium/Celeron pro-
cessor
96 MB or more (128 MB or more recommended)
Macintosh computer with built-in USB interface
MacOS X 10.3.3 or higher
Macintosh G3 300 MHz or higher/Intel processor
128 MB or more
Windows XP Professional/XP Home Edition
1.4 GHz or higher Intel Pentium processor
512 MB or more
Windows DirectX compatible
400 MB or more
MacOS X 10.4 or higher
Power Mac G4 1 GHz/Core Solo 1.5 GHz or higher
512 MB or more
400 MB or more
• A DVD driver is required for installation.
• To activate your software license, install the application
while the computer is connected to the internet.