Before Turning On The Mixer; Turning The Power On/Off; Computer System Requirements; Cubase Le System Requirements - Yamaha MW12 Owner's Manual

Usb mixing studio
Hide thumbs Also See for MW12:
Table of Contents

Advertisement

Foreword

Before Turning on the Mixer

1
Be sure that the mixer's power switch is in
the STANDBY position.
Use only the PA-20 adaptor included with this
mixer. Use of a different adaptor may result in
equipment damage, overheating, or fire.
2
Connect the power adaptor to the AC
ADAPTOR IN connector (1) on the rear of
the mixer, and then turn the fastening ring
clockwise (2) to secure the connection.
2
3
Plug the power adaptor into a standard
household power outlet.
• Be sure to unplug the adaptor from the outlet
when not using the mixer, or when there are
lightning storms in the area.
• To avoid generating unwanted noise, make
sure there is 50 cm or more between the
power adaptor and the mixer.

Turning the Power On/OFF

Press the mixer's power switch to the ON position.
When you are ready to turn the power off, press the
power switch to the STANDBY position.
Note that trace current continues to flow while
the switch is in the STANDBY position. If you do
not plan to use the mixer again for a long while,
please be sure to unplug the adaptor from the
wall outlet.
n
To prevent loud pops and noises, turn on the
power to your sound gear starting with the
sources (instruments, CD players, etc.) and
ending with the power amplifier or powered
speakers.
Example: Instruments, microphones, and CD
players first, then the mixer, and finally the
power amplifier or powered speakers.
When turning off the power to the system,
reverse the order described above.
6
MW12 Owner's Manual

Computer System Requirements

Windows
Macintosh

Cubase LE System Requirements

Windows
1
Macintosh
Computer
Windows-based computer with built-in USB
interface
OS
Windows XP
CPU
750MHz or higher Intel Pentium/Celeron processor
Memory
More than 96MB (128MB or more recommended)
Computer
Macintosh computer with built-in USB interface
OS
MacOS X 10.3.3 or higher
CPU
Macintosh G3 processor 300MHz or higher
Memory
More than 128MB
OS
Windows XP
CPU
500 MHz or higher Pentium III or AMD K7
(1GHz or more recommended Pentium III/Athlon)
Memory
More than 256MB (512MB or more recommended)
Hard Disk
1GB or more
OS
MacOS X 10.3.3 or higher
CPU
Macintosh G4 processor 450MHz or higher
Memory
More than 256MB (512MB or more recommended)
Hard Disk
1GB or more

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents