Before Turning On The Mixer; Turning The Power On - Yamaha 12/4 Owner's Manual

Before Turning on the Mixer

(1) Be sure that the mixer's power switch is in the STANDBY
position.
Use only the PA-20 adaptor included with this mixer.
Use of a different adaptor may result in equipment
damage, overheating, or fire.
(2) Connect the power adaptor to the AC ADAPTOR IN con-
1
nector ( ) on the rear of the mixer, and then turn the fas-
2
tening ring clockwise (
2
(3) Plug the power adaptor into a standard household power outlet.
Be sure to unplug the adaptor from the outlet when
not using the mixer, or when there are lightning
storms in the area.
) to secure the connection.
1

Turning the Power On

Press the mixer's power switch to the ON position. When you are
ready to turn the power off, press the power switch to the
STANDBY position.
Note that trace current continues to flow while the
switch is in the STANDBY position. If you do not plan
to use the mixer again for a long while, please be sure
to unplug the adaptor from the wall outlet.
Introduction
MG16/4, MG12/4
5