Sony STR-DE675 Operating Instructions Manual page 9

Connect the digital output jacks of your MD or tape deck
to the receiver's digital input jack and connect the digital
input jacks of your MD or tape deck to the receiver's
digital output jack. These connections allow you to make
digital recordings of a CDs played back through your
DVD (or LD player) and satellite broadcasts.
Optical digital cords (not supplied)
Black _m,
Audio cords (not supplied)
,,i_ Black
IN
MD or tape deck
t t
OUT OUT
When connecting a cord, be sure to match the color coded
pins to the appropriate jacks on the components.
White (L) White (L)
Red (R) Red (R)
_[.]Ibi[.]
i@@
iVIDEO OUT'¢_EO ,,
i@L@
iAUD_OUT A'miO , ,
@
V_DEOOUT
SVIOEO
OJT
T
@
SURROUND CENTER
i
{ ]
Z
0
0
5'
C
"0
0
3
"0
0
Notes
• Please note that you cannot make a digital recording of a digital multi channel surround signal.
• To make a digital recording from your CD player, connect the CD player's digital output directly to the digital input on your MD or tape
deck. Refer to the instructions supt)lied with your CD player and MD or tape deck for details.
• The DVD/LD IN OPTICAL and COAXIAL jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling frequencies. The
other OPTICAL jacks are compatible with 48 kHz, 44.1 kHz and 32 kHz sampling frequencies.
• It is not possible to record analog signals to TAPE and VIDE() with only digital connections. To record analog signals, make analog
connections. To record digital signals, make digital connections.
• Input signals with 96 kHz sampling frequencies to the DVD/LD IN OPTICAL or COAXIAL jacks. Using other jacks may result in
intermittent sound.
9