Sony STR-DE675 Operating Instructions Manual page 50

Specifications
Q.
Q.
m.
W
m
5"
o
W
Tuning range
Models of area code
AU, SP, CN
531 - 1602 kHz (9 kHz
step)
Models of area code E2,
E3, TW
530 - 1610 kHz (10 kHz
step) `}
531 - 1602 kHz (9 kHz
step) `}
Antenna Loop antenna
Intermediate frequency
450 kHz
Usablesensitivity
50 dB/m (at 999 kHz)
SIN
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m,
400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
c) You can change the AM tuning interval to
10 kHz. After tuning in any AM station,
tur_t off the t_xeiver. Hold down the
TUNING + button and pn'ss the I/(_)
button. All pn'set stations will be erased
when you change the tuning interval. _1_)
t_'set the scale to 10 kHz, repeat the
pn)cedun'.
Inputs
Outputs
Video: 1 Vp-p 75 ohms
S-vid eo:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
Video: 1 Vp-p 75 ohms
S-vid eo:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
System
Tuner section:
PLL qua rtz-locked
digital synthesizer
system
Preamplifier section:
Low-noise NF type
equalizer
Power amplifier
section:
Pure-complementary
SEPP
Power requirements
Models of area code
AU: 240 V AC, 50 Hz
Models of area code SP,
CN:
220 - 230 V AC,
50/60 Hz
Models of area code E2,
E3:
120/220/240 V AC,
50/60 Hz
Models of area code TW:
ll0V AC, 50/60 Hz
Power consumption
Models code area code
AU, E2, E3:
210W
In stand by condition:
1W
Models code area code
SP, CN:
210W
In stand by condition:
1W
Models code area code
TW:
410 W
In stand by condition:
1W
AC outlets
1 switched, total 100 W
maximum (except
models of area code
CN)
Dimensions 430 x 308.5 x 157.5 mm
including projecting
parts and controls
Mass (Approx.)
7.5 kg
Supplied accessories
See page 4.
For details on the area code of the
component you are using, see
page 3.
The specification measured is under
• 230 V AC 50 Hz condition (models
of area code SP, CN).
• 240 V AC 50 Hz condition (models
of area code AU, E2, E3).
• 110 V AC 50 Hz condition (models
of area code TW).
Design and specifications are subject
to change without notice.
5O