Component Hookups - Sony STR-DE675 Operating Instructions Manual

Digital Component Hookups
o
o
5'
c
o
3
"o
o
Connect the digital output jacks of your DVD player and
satellite tuner (etc.) to the receiver's digital input jacks to
bring the multi channel surround sound of a movie
theater into your home. To enjoy full effect of multi
channel surround sound, five speakers (two front
speakers, two surround speakers, and a center speaker)
and a sub woofer are required. You can also connect an
LD player with an RF OUT jack via an RF demodulator,
such as the Sony MOD-RF1 (not supplied).
TV or Satellite
tuner
@
VlDEOOUT
%P
@
Optical digital cords (not supplied)
Black _i=, ,_ Black
Coaxial digital cord (not supplied)
Yellow =C_] _ Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Yellow (video) Yellow (video)
White (L/audio) White (L/audio)
Red (R/audio) Red (R/audio)
Note
The optical and coaxial digital input jacks on the receiver are
compatible with sampling frequencies of 32 kHz, 44.1 kHz,
48 kHz and 96 kHz** (**DVD/LD only).
SURROUND CENTER FRONT
* When making digital audio connections to a DVD playe_, connect to either the coaxial OR optical digital iacks, and not both. It is recommended to
make digital audio connections to the coaxial jack.
Please note that you cannot connect an LD player's AC-3 RF OUT jack directly to the receiver's digital input jacks. You
must first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF demodulator,
then connect the RF demodulator's optical or coaxial digital output to the receiver's OPTICAL or COAXIAL DVD/LD IN
jack. ]Refer to the instruction manual supplied with your RF Demodulator for details on AC-3 RF hookups.
l DVD/LD VIDEO OUT VIDEO IN
LD player RF demodulator
AC-3 RF
OUT
DIGITAL
DVD/LD IN
(COAXIAL)
or (OPTICAL)
Note
When making connections as shown above, be sure to set INPUT MODE ([]_] on page 25) manually. The receiver may not operate correctly
if INPUT MODE is set to "AUTO/'
8