Sony STR-DE675 Operating Instructions Manual page 45

Adjustment Using the SET
UP Button
CONTROL A1 II Control
System
The SET UP button allows you to make the following
adju stments.
This parameter lets you specify the video input to be used
with the audio signals fl'om the MULTI CH IN jack. The
MULTI CH IN video input is set to DVD/LD by default.
1
Press SET UP.
2
Press the cursor buttons (_ or _) to select
":_i_L_T_&_'h:_" VISUAL.
:3 Turn the jog dial to select the video input you
want.
This parameter lets you specify whether or not the display
turns offwhen you press the DIMMER button several
times. When "WIDE" is selected, you can set the display
to turn off, but when "NARROW" is selected, you cannot
set the display to mrn off. The default setting is set to
"NARROW".
1
Press SET UP.
2
Press the cursor buttons (_ or _) to select "DIM,
RANGE",
3 Turn the jog dial to select "NARROW" or "WIDE".
This section explains the basic functions of the
CONTROL A1 lI Control System. Certain components
have special functions, like "CD Synchro Dubbing" on
cassette decks, that require CONTROL A1
connections. For detailed information regarding
specific operations, be sure to also refer to the
Operating Instructions supplied with your
component(s).
The CONTROL A1 II Control System was designed to
simplify the operation of audio systems composed of
separate Sony components. CONTROL A1 lI connections
provide a path Ik)r the transmission of control signals
which enable automatic operation and control %amres
usually associated with integrated systems.
Currently, CONTROL A1 I1 connections between a Sony
CD player, amplifier (receiver), MD deck and cassette
deck provide automatic flmction selection and
synchronized recording.
In the fllture the CONTROL A1 I! connection will work as
a mu ltifllnction bus allowing you to control various
flmctions lor each component.
Notes
• The CONTROL A1 II Control System is designed to maintain
upward compatibility as the Control System is upgraded to
handle new functions. In this case, however, older components
will not be compatible with the new functions.
• Do not operate a 2 way remote control unit when the
CONTROL A1 II jacks are connected via a PC interface kit to a
personal computer running "MD Editor" or similar application.
Also, do not operate the connected component in a manner
contrary to the functions of the application, as this may cause
the application to operate incorrectly.
O
O
¢
CONTROL A1 II and CONTROL A1 compatibility
The CONTROL A] control system has been updated to the
CONTROL A111 which is the standard system in the SONY
300 disc CD changer and other recent Sony components.
Components with CONTROL A1 jacks are compatible with
components with CONTROL A1 II, and can be connected to
each other. Basically, the majority of the functions available
with the CONTROL A1 control system will be available with
the CONTROL A1 II control system.
However, when making connections between components
with CONTROL A1 jacks and components with CONTROL
A1 II jacks, the number of functions that can be controlled
may be limited depending on the component. For detailed
information, refer to the Operating Instructions supplied with
the component (s).
45