Sony STR-DE675 Operating Instructions Manual page 55

If the factory settings of the FUNCTION buttons don't
match your system components, you can change them.
For example, if you have an MD player and a tape deck
and you don't have a CD player; you can assign the CD/
SACD button to your tape deck.
Note that the settings of the TUNER and FN SHIFT
functions (VIDEO 1, VIDEO 2, VIDEO 3, PHONe and
MD/TAPE) button cannot be changed.
>10
I_Pgl
AV i/l_
SLEEP I/(_/ 'v
M
STANDBY
-- FUNCTION--
VIDE01 VIDE02 VIDEO3
PHONe _APE
(2J
®" ®
SHIFT RETURN
POSITION SWAP
DSKIPI
- SUB CH + CHIPRESET
ANT
DISPLAY P IN P TVNTR
TV/
aUMP W_DE VIDEO
I
MASTER
T£ST TONE MAIN MENU VOL
-- MENU --
C=D
AV I/_
I/_
Function buttons
Numeric buttons
ENTER
MASTER VOL -
1
2
Hold down the Function button whose flmction you
want to change (for example, CD/SACD).
Press the corresponding button of the component
you want to assign to the Function button (for
example, 4 - Tape deck).
The following buttons are assigned to select the ftmctions:
To operate Press
CD player 1
DAT deck 2
MD deck
3
Tape deck A 4
Tape deck B 5
LD player 6
VCR (remote control mode VTR 1") 7
VCR (remote control mode VTR 2*) 8
VCR (remote control mode VTR 3*) 9
TV 0
DSS (Digital Satellite Receiver) >10
DVD ENTER
VCD player
I_1_1
* Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8ram and VHS respectively.
Now you can use the CD/SACD button to control the
tape deck.
To reseta button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press I/(_),AV I/(_) and MASTER VOL - at the same time.
B'
3
B'
55