Samsung FACSIMILE SF40 Service Manual page 13

6-3. Removing the OPE Assembly from
Top-Cover
1. Loosen the screws fastening the top-cover.{ 2 Screws )
2, Lift up the OPE assembly carefully as shown below.
6-4, Removing OPE unit from the OPE cha-
ssis
1. Loosen the screws fastening the OPE chassis.
( 2 Screws )
2. Removing the paper empty sensor connector from the
OPE board.
3. Removing the OPE unit from the OPE chassis as shown
below.
12
6-5. Removing the Main chassis from the
Base
1. Loosen the screw fastening the power and ground har-
ness.
2. Loosen the screws fastening the main chassis assembly.
(3 screws)
3. Lift up the main chassis assembly and D.DET sensor.
6-6. Removing the Power and Boards from
the Base.
=
. Removing the handset modular harness from LIU board.
2. Loosen the screw fastening the LIU board and liftup the
LIU board carefully as shown below.
Loosen the screws fastening the main & daughter board.
(3 Screws )
Lift up the bracket-rear.
. Loosen the screw fastening the base & daughter board.
(1 Screw )
Lift up the daughter board.
. Loosen the screws fastening the power and base.
(2 Screws )
Lift up the power & main board and remove it.
6. Lift up the modular jack and spring-earth.
o
hb
a