2-6 EMC Plate Installation
2-6-1 Installation Method
Frame A–C
Applicable models: VFD3A0–038VP43ANTAA
1. Fasten the metal plate on the AC motor drive, as shown in the figure below.
Frame
A–C
2. Choose the applicable Ohm clips according to the wire gauge and fasten it on the metal plate.
Frame
A–C
Screw Spec. and Torque
M3 6–8 kg-cm / (5.2–6.9 lb-in.) / (0.59–0.78 Nm)
Screw Spec. and Torque
M4 14–16 kg-cm / (12.2–13.9 lb-in.) / (1.37–1.57 Nm)
Chapter 2 Mechanical Installation|VP3000
Figure 2-65
Figure 2-66
49