Input Through Component Video Input - Panasonic TU-PTA500U Operating Instructions Manual

Setting when 480p signals (sequential scan)are input through COMPONENT VIDEO INPUT I
Displays input signals (48Op signals) in a natural color from digital equipment adapters
connected to COMPONENT VIDEO INPUT (Y, Pb / Cb
,Pr
/ Or input terminals).
1
Press the MENU button to display the MENU screen and select SETUP
(Excepl in PC mpul mode)
Ca
Press to select VIDEO
Press to display the VIDEO screen.
MENU
SET UP
LANGUAGE ]
PROGRAM CHANNELS J
{il ILOCK I
CLOSED CAPTION ]
[_ V,DEO ]
CH
,._L<::1 1::>,,,oL
c_
2
,C. _ IC'L
C_
Press to display PAGE 3/3 and select 480p COLOR
MATRIX.
Press to set.
SDTV : When the input signal is a normal TV
system (NTSC).
HDTV : When the input signal is a Hi-Definition
system (HD).
NATURAL COLOR
48013 C OLORMATRIX
MENU
@- Press to end.
Note:
The VIDEO screen consists of 3 pages
Use the up • and down • buttons to change pages
480p COLOR MATRIX does not need to be set when using H_-Defin_hon equppment or 480_ output equlpr'nent
50