Table of Contents
Advertisement
Manuals for this recorder are prepared in two parts.
Section 1 : Before Use
Section 2 : Operation
Before operating this product, please read the instructions carefully and
save this manual for future use.
Operating Instructions
WJ-VPU4000
Model No.
(this manual)
(for operating procedures, functions, etc.)
(PDF)
Section 1 : Before Use
Network Recorder
For professional use only
Advertisement
Table of Contents
Related Manuals for Panasonic WJ-VPU4000
Summary of Contents for Panasonic WJ-VPU4000
- Page 1 Operating Instructions Section 1 : Before Use Network Recorder WJ-VPU4000 Model No. For professional use only Manuals for this recorder are prepared in two parts. Section 1 : Before Use (this manual) Section 2 : Operation (for operating procedures, functions, etc.)
-
Page 2: Table Of Contents
Contents Read this first! .........3 Before Use ........16 IMPORTANT SAFETY Notes on Handling ......19 INSTRUCTIONS ......11 Control Reference Guide ....20 Functions of This Recorder ...12 Connections ........26 Included Accessories .....13 SSD Insertion and Removal ...28 Other Necessary Items Turning the Recorder On and Off ..30 (not included) ........13 On ..........30 Options ..........13... -
Page 3: Read This First
Read this first! WARNING: • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. • The installation shall be carried out in accordance with all applicable installation rules. • This product has no power switch. When turning off the power, turn off a Power Supply or remove a power cable. - Page 4 Supplier’s Declaration of conformity Trade name: Panasonic Model No.: WJ-VPU4000 Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, New Jersey 07102-5490 Support Contact: 1-800-528-6747 FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules.
- Page 5 Read this first! (continued) AVERTISSEMENT: • Afin d'éviter tout risque de déclaration d'incendie ou d'électrocution, ne pas exposer cet appareil à la pluie ni à l'humidité. • L’installation doit être effectuée conformément à toutes les règles d’installation en vigueur. • Ce produit ne dispose pas d’un interrupteur d’alimentation. Une fois l’appareil hors tension, éteindre la source d’alimentation ou retirer le câble d’alimentation.
- Page 6 Read this first! (continued) • Des câbles blindés LAN (STP) doivent être utilisés avec cet appareil pour assurer la conformité aux normes CEM. • Cet enregistreur est destiné à un usage et à une installation dans un véhicule. Par exemple, il peut se monter sur une console centrale ou dans un coffre. •...
- Page 7 Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. This [WJ-VPU4000] has been tested and meets the FCC RF exposure guidelines when used with the [Panorama Antennas Ltd] accessories supplied or designated for this product.
- Page 8 Read this first! (continued) For Canada <IC Information> The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating an adapter in compliance with local regulations. Informations à fournir à l’utilisateur final par l’installateur ou l’intégrateur Les consignes de contrôle et de sécurité...
- Page 9 20 cm ou plus entre le radiateur et le corps humain. This WJ-VPU4000 has been tested and meets the ISED RF exposure rules when used with the Panorama Antennas Ltd accessories supplied or designated for this product.
- Page 10 Read this first! (continued) Mandatory Safety Precautions for Installation WARNING: To reduce the risk of fire or damage to the product, be sure to follow the instructions below. • Read the operating instructions of this product and optional equipment carefully. •...
-
Page 11: Important Safety Instructions
Model No. Serial No. Notice (U.S.A. only): Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: https://www.panasonic.com/us/corporate/sustainability.html or call 1-888-769-0149. -
Page 12: Functions Of This Recorder
Functions of This Recorder The WJ-VPU4000 is a video recorder using an SSD (Solid State Drive). Separately sold network cameras, and a trigger cable can be connected to the recorder, as can off-the-shelf radar guns and microphones. The recorder can be controlled using software installed on a personal computer. -
Page 13: Included Accessories
Antenna Side Camera (SH-IN2568/SH-IN2568-W, locally procured) Note: Multiple antenna for WLAN × 2 You can connect Panasonic network Bluetooth, GPS cameras. Refer to the Operating Instructions Note: • Part No. of different colors (Electrical for the Front-End Application for details on supported models. -
Page 14: About Manuals Of This Recorder
About Manuals of This Recorder Manuals for this recorder are prepared in two parts: Section 1: Before Use (this manual) Section 2: Operation (for operating procedures, functions, etc.) (PDF) Ask the supplier for information on how to obtain "Section 2: Operation." LEDs described as lamps or indicators in the operating manual of network cameras are described as lamps in this manual. -
Page 15: Disclaimer Of Warranty
Disclaimer of warranty IN NO EVENT SHALL Panasonic i-PRO Sensing Solutions Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;... -
Page 16: Before Use
Operating Instructions for Front-End Application or contact your supplier. • In no event will Panasonic i-PRO sensing solutions Co., Ltd. be liable for any damages, including any incidental or consequential damages, stemming from a failure to record data or from lost settings or data. - Page 17 Before Use (continued) n About the Internal Clock n Network Security Confirming the Time In order to reduce the occurrence of the security problem, make sure to The internal clock is set at the time set up the security-relating functions of factory default.
- Page 18 Before Use (continued) • After the unit is accessed by the • Re-writing the intercepted administrator, make sure to close communication content the browser for added security (refer (Falsification) to the Operating Instructions for • Sending computer viruses to corrupt Front-End Application).
-
Page 19: Notes On Handling
Notes on Handling n Usage Precautions for use of SSDs • Do not set liquid containers or small • SSDs are formatted using the metal objects on the recorder or Front-End Application. SSDs SSDs. formatted by any means other than •... -
Page 20: Control Reference Guide
Control Reference Guide Front panel (1) ① REC lamp ④ SSD lamps 1, 2 Lights during recording. Flashes Light green when recordable SSDs when the combined remaining are inserted in the SSD slots. recording time of drives inserted in ⑤ Lock SSD slots 1 and 2 is less than 30 minutes. - Page 21 Control Reference Guide (continued) Front panel (2) ① SSD slots 1, 2 ③ SSD lamps 1, 2 Insert SSDs here. When SSD slot cover opened, if Up to two drives can be inserted the light flashes, do not pull out the simultaneously.
- Page 22 Control Reference Guide (continued) Rear panel (1) ① WLAN [1A, 1B] connector • During GPS reception, the signals received will regularly and ② WLAN [2A, 2B] connector automatically set the recorder ③ Bluetooth [BT] connector clock to GPS time, and provide ④...
- Page 23 Control Reference Guide (continued) Rear panel (2) ⑧ I N CAR MIC, AUDIO IN [1, 2] ⑫ GPIO connector connectors This combo connector accepts These are line and microphone level up to 16 trigger signal (GPI 1-16) signal inputs. inputs and supplies up to four signal The output signals of audio (GPO1-4) outputs.
- Page 24 For center console mounting, remove the screw to remove the mounting bracket. Rotate the mounting bracket 90° and attach the screw again. Panasonic i-PRO Sensing Solutions Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.
- Page 25 Control Reference Guide (continued) Ventilation Do not block the ventilation inlet or outlet. Left side Ventilation inlet Right side Ventilation outlet (fan) Note: • Leave at least 3 cm {1-1/4 inches} around the Ventilation inlet and outlet.
-
Page 26: Connections
Connections • You are recommended to connect the recorder to the power cable via an Automotive Distribution Center (manufactured by LIND ELECTRONICS, Inc.). • Connect the red (BATT) and white (SIGNAL) power cable wires via a fuse (10 A). (A power cable is included in the separately sold Cable Kit.) •... - Page 27 Connections (continued) PC (commercially available, PC (commercially available, for Front-End Application) for Back-End Application) Network camera Back seat Shielded LAN cable Shielded LAN cable Shielded LAN cable (commercially (commercially available) available) Network camera Network camera Side Front Wireless 2 Wireless 1 antenna antenna Shielded...
-
Page 28: Ssd Insertion And Removal
SSD Insertion and Removal Inserting an SSD (1) Unlock the key. (3) Insert an SSD into an SSD slot. Insert the key in the lock and turn it clockwise to [ ] and remove it. Note: • Use officially supported SSD. (4) Close the SSD slot cover. - Page 29 SSD Insertion and Removal (continued) Removing an SSD (1) Open the SSD slot cover (3) Close the SSD slot cover. (see previous page). Return the SSD slot cover to its original closed position by pushing (2) Remove the SSD by pulling to the end.
-
Page 30: Turning The Recorder On And Off
Turning the Recorder On and Off Recorder power is supplied from the vehicle’s battery. Turn the vehicle’s ignition switch to ON or ACC. Power to the recorder is turned on. Turn the vehicle’s ignition switch to LOCK (OFF). Power to the recorder is turned off. Note: The [Power Off Time] can be set to allow the recorder to continue operating after... -
Page 31: Connector Signals
Connector Signals [DC IN] connector Signal Cable color (male) number GND ( ) Black BATT ( ) 12V/24V SIGNAL* White N.C. Black White Power cable (included in the separately sold Cable Kit) * Recorder power can be turned on and off by the SIGNAL port. If an OFF signal is input while the recorder is operating, the recorder turns off after the time specified on Front-End Application. - Page 32 Connector signals (continued) [GPIO] connector Signal Cable color (female) number Black/White N.C. — GPI 13 Pink GPI 14 Light Green GPI 15 Brown/White GPI 16 Orange/White GND (DIGITAL) Green/Black Trigger cable GPO 2 Green/White (included in the separately Black sold Cable Kit) GPI 1 Brown GPI 2...
-
Page 33: Troubleshooting
Troubleshooting Before requesting service, check the points listed below. If the problem persists, contact your supplier. n Starting up Symptom Remedy Power does not • Check whether power cable (included in the sold come on. separately Cable Kit) is connected correctly. -
Page 34: Specifications
Specifications • BWC-DOCK Power requirements: RJ-45, 100BASE-TX 12 V DC / 24 V DC For WV-BWC40D1A/WV-BWC40D1, Input current: WV-TW37004A/WV-TW37004 4.7 A (at 12 V DC) 2.3 A (at 24 V DC) Note: (When 5 cameras CAMERA Port total power are connected) consumption must be less than 26 W. - Page 35 Specifications (continued) • WIRELESS 1 ANT connector × 2 For the antenna SH-IN2568. • WIRELESS 2 ANT connector × 2 For the antenna SH-IN2568. • Bluetooth ANT connector × 1 For the antenna SH-IN2568. • GPS ANT connector × 1 For the antenna SH-IN2568 n Other connectors •...
- Page 36 Panasonic i-PRO Sensing Solutions Corporation of America 800 Gessner Rd, Suite 700 Houston, TX 77024 https://www.security.us.panasonic.com/ Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 1-877-495-0580 https://www.panasonic.com/ca/ © Panasonic i-PRO Sensing Solutions Co., Ltd. 2021 LJe0421-0 Printed in Japan...